Blog

Our head office and manufacturing plant in South Australia houses our team of Engineers, who have abundant levels of industry relevant knowledge between them, and are able to provide highly specific advice on using our products and making sure that they will suit almost any specific site requirement... Continue Reading

Some of the different channel/strut products from EzyStrut are manufactured with different material thicknesses: The E1000 (41mm high), E3300 (21mm high), and the E5500 (61mm high) products made from steel are made with a wall thickness of 2.5mm. The only exception to this rule to remember is that t... Continue Reading

An important feature to remember with Splice Bolts is that they are manufactured with a smooth head, so that when you use them to install a splice or other accessory into a tray or ladder there is no risk of sheathing your cables. The bolts used on tray systems are generally hot dip galvanised, whil... Continue Reading

EzyStrut offers fasteners and associated nuts and washers in hot dip galvanised, zinc plated, or stainless steel. Stainless steel fasteners should be used when you need to install stainless, FRP, or aluminium support components. If you are working with stainless steel strut and fittings, normally yo... Continue Reading

Here are some great examples of stainless steel E2875s being used on a job site installed onto a beam. When used in pairs to hold a length of 41x41mm strut in place, they have a rated load of 407kg.   Continue Reading

There are many projects that require strut to be joined not just lengthways, but also at an angle and at different orientations. For example, you may need to have one length connected to another at a 90 degree angle and make sure that the open part of the strut faces a specific direction. This is po... Continue Reading

Here is an EzyStrut Stainless Steel U Bolt being used to clamp down a large diameter pipe onto an I-Beam. In this case, Hex Nuts are used both above and below the hole in the beam, to help prevent any movement in the bolt. It is possible to use these bolts to either clamp down or hang pipes in a sad... Continue Reading

Here is a smaller project that used standard EzyTray supplied in the last year. This install shows that it is possible to install a tray rotated at a right angle along a wall, which is particularly useful if it is not possible to allow for the product to be installed where it is supported by its bas... Continue Reading

Looking back at the past year, one of the products we were pleased to supply was our custom sized pipe clamps: In these examples, we have different sized two-piece (top) and single 'saddle' varieties (bottom), tailor made to suit special requests for particular pipe sizes. We were able to turn these... Continue Reading

An update on our Quick Reference Guides...have you noticed the QR (aka 'Quick Response') codes placed on some of them? Via your smartphone, these scannable codes provide you with easy links to our product info online and helpful resources like our tutorial videos. Why not give them a try next time y... Continue Reading